| Series | SB 175 |
| Maximum Current Rating (UL 1977, 1/0 AWG Wire-to-Wire) | 280 Amps |
| Maximum Current Rating (CSA, 1/0 AWG Wire-to-Wire) | 175 Amps |
| Maximum Wire Size (AWG) | 1/0 AWG (53.4 mm) |
| Wire Size Range (AWG) with Bushings | 10 to 1/0 AWG (5.2 to 53.4 mm) |
| Voltage Rating (AC/DC) | 600V |
| Dielectric Withstanding Voltage (AC) | 2,200 Volts |
| Operating Temperature (Standard Housing) | -20C to 105C (-4F to 221F) |
| Operating Temperature (Chemical Resistant Housing) | -40C to 105C (-40F to 221F) |
| Mating Cycles (Silver Plated Contacts, No Load) | 10,000 Cycles (Wire and Busbar Contacts) |
| Hot Plug Current Rating (1/0 AWG Wires) | 100 Amps (250 cycles at 120V DC) |
| Contact Termination Methods | Crimp (Wire Contacts), Hand Solder (Wire Contacts), Wrench/Socket (Busbar Contacts) |
| Housing Colors | Yellow, Orange, Red, Gray, Blue, Black (Keyless) |
| Chemical Resistant Housing Colors | Red, Gray |
| SB 175 2/0 Housing Current Rating (UL 1977) | 340 Amps |
| SB 175 2/0 Housing Current Rating (CSA) | 200 Amps |
| SB 175 2/0 Housing Wire Size | 2/0 AWG (70 mm) |
| SB 175 2/0 Housing Voltage Rating | 600V |
| SB 175 2/0 Housing Avg. Contact Resistance | 0.045 m |
| SB 175 3 Pole Housing Configurations | 2-wire plus ground, AC single phase |
| IEC Rating (AMP) | 175 Amps AC/DC |
| IEC Voltage Rating (Steady State) | 500 V AC/DC |
| IEC Breaking Capacity | 175 Amp / 10 Cycles |
| IEC Voltage Rating (Breaking Capacity) | 220 VDC |
| IEC Finger Safety (Mated) | IP20 |
| IEC Wire Size Tested | 50 mm |
| IEC Temperature Range | -20C to 105C (-4F to 221F) |
| Environmental Sealing (with Boots) | IP64 |
