| Current Rating (16 AWG) | 15A (1-pin), 14A (2-pin), 12A (3-pin), 10A (4-pin), 10A (5-pin), 10A (6-pin) | Note 1: Max current when all pins are powered. |
| Current Rating (2-pin, 7.92mm pitch) | 15A (16 AWG), 13A (18 AWG), 11A (20 AWG), 9A (22 AWG) | |
| Current Rating (3-pin, 7.92mm pitch) | 12A (16 AWG), 11A (18 AWG), 9A (20 AWG), 8A (22 AWG) | |
| Voltage Rating | AC/DC 630V (Specification), AC/DC 600V (UL, C-UL), AC/DC 300V (TV) | |
| Insulation Resistance | No less than 1,000M | Measured at DC 500V |
| Withstand Voltage | No flashover or breakdown | AC 1,500V for one minute |
| Contact Resistance | No more than 10m | Measured at 1mA and no higher than 20mV |
| Vibration Resistance | No electrical discontinuity of 1s or greater | Frequency 10-55 Hz, half amplitude 0.75 mm, 10 times in each of the three directions |
| Shock Resistance | No electrical discontinuity of 1s or greater | Accelerated velocity: 490 m/s for 11ms, half-sine wave in 3 directions, 3 times for each direction |
| Moisture-resistance | Contact resistance: no more than 20m; Insulation resistance: no less than 500M | Temperature: 402C; humidity: 90 to 95%, 96 hours |
| Temperature cycles | Contact resistance: no more than 20m; Insulation resistance: no less than 1,000M | -55C (30 min) 85C (30 min), 5 cycles |
| Durability | Contact resistance: no more than 20m | Tin plated: 30 mating cycles; Gold plated: 50 mating cycles |
| Solder heat resistance | Resin parts withstand temperature and resist melting | Flow: 260C, 10 sec; Hand soldering: 300C for 3 seconds |
| Operating temperature range | -55 to 105C | Note 2: Includes temperature rise caused by current flow. |
| Operating humidity range | 20 to 80% | Note 3: Use without condensation on parts. |
| Storage temperature range | -10 to 60C | Note 4: For long-term storage before assembly. |
| Storage humidity range | 40 to 70% | Note 4: For long-term storage before assembly. |
| UL/TV File No. | UL: E52653, C-UL: E52653, TV: R50318850 | |
