Home > Rectangular Connectors >

HCTL HC-2510-4A

Product Categories

Shenzhen ECER Network Technology Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

HCTL HC-2510-4A

Name: HCTL HC25104A
Brand: HC-2510-4A
Price: 1 USD

Stock : 11020

Pins Structure : 1x4P

Number of PINs Per Row : 4

Delivery Time : 1 working day

X-Length of Bottom Edge on Board (Spacing Line) : 10.16mm

Description : Connector Header 4 position 2.54mm Pitch 4A Through Hole -25℃~+85℃

Mounting Type : Through Hole

Model Number : HC-2510-4A

Brand Name : HC-2510-4A

Y-Width of Bottom Edge on Board : 5.8mm

Pitch : 2.54mm

Flame Retardant Rating : UL94V-0

Voltage Rating (Max) : 250V

Contact Plating : Tin

Number of Rows : 1

Operating Temperature : -25℃~+85℃

MOQ : 10

Packaging Details : Through Hole,P=2.54mm

Contact Material : Brass;PA66

Z-Height of the Board : 11.6mm

Contact Now

Product Overview

Scope: This specification applies to the 2510 series connector strip, covering product performance, test methods, and inspection requirements.

Applicable Standards: GB/T2421, GB/T2423, GB/T2424, GB/T5095.

Use Conditions: Ambient temperature range: -25+85; Applicable wire sizes: AWG#24#30; Applicable PC board thickness: 1.6mm.

Brand

Huatian Tianlu Electronics Co., Ltd.

Origin

China

Product Name

2510 Series Connector Strip

Model Number

2510 Series

Certifications

UL94V-0 (for Housing material)

Packaging Types

Dish material packaging (Terminals), Plastic bags (Housing), Bag packaging (Wafer), Carton (Exterior)

Item	Material	Finish	Requirement
Terminal (Contact)	Phosphor bronze (Thickness: 0.20mm)	Tin Plating: 3~5m	-
Housing (Plastic Shell)	Nylon66	Color: White	UL94V-0
Housing (Plastic Shell)	Nylon66	Color: Beige	UL94V-0
Wafer (Contact Pin)	Brass (Thickness: 0.64mm)	Tin Plating: 2.5~5m	-

Item	Test Mode	Requirement
Rated Current	-	4A AC/DC
Rated Voltage	-	250V AC/DC
Contact Resistance	Mate connector, 20mV max, 100mA max	Initial value 20m
Withstand Voltage	Mate connectors, 1000V AC (rms) for 1 min, leakage current 0.5mA	No breakdown or flashover
Insulation Resistance	Between adjacent contacts, 500V DC (rms) for 1 min	1000 M

Item	Test Mode	Requirement
Terminal crimping wire strength	AWG#24 wire, pullout force @ 253mm/min	30N
Terminal crimping wire strength	AWG#26 wire, pullout force @ 253mm/min	20N
Terminal crimping wire strength	AWG#28 wire, pullout force @ 253mm/min	13N
Terminal crimping wire strength	AWG#30 wire, pullout force @ 253mm/min	8N
Fixed terminals and hole seat	Per contact, pullout force @ 253mm/min along wire direction	15N
Single contact insertion force	Housing with terminal and wafer matched, insertion force @ 253mm/min	6N
Single contact withdrawal force	Housing with terminal and wafer matched, withdrawal force @ 253mm/min	0.6N
Pin Retention force	Per contact, pullout force @ 253mm/min on pin end	15N
Durability	Mate connectors, 30 cycles (max 10 cycles/min) prior to environmental test	Contact Resistance 30 m
Vibration	Connector combination on welded PCB, 10-55-10 Hz/min, 1.5mm p-p amplitude, 2 hours per axis (X, Y, Z)	Appearance: No damage, Contact Resistance 30 m, Current Discontinuity: 1sec Max

Item	Test Mode	Requirement
Thermal Aging	Connector combination in oven, 852 for 96 hours	Appearance: No damage, Contact Resistance 30 m
Temperature Rise	Mate connector at max rated current	30 Max
Humidity	Connector combination, 402, 90-95%RH for 96 hours	Appearance: No damage, Contact Resistance 30m, Insulation Resistance 500M, No breakdown or flashover
Temperature Cycling	Connector combination, 5 cycles (-553 for 30min, 853 for 30min, with transition time)	Same as Humidity test (Contact Resistance 30m, Insulation Resistance 500M, No breakdown or flashover)
Salt Spray	Connector combination, 353, 51% solution. Stamping after tin plated: 8 hours; Stamping before tin plated: 48 hours	Appearance: No damage, Contact Resistance 30 m
Solder Ability	Immersion in solder pot, 2455 for 30.5S	Area of Soldering 90%
Resistance to Soldering Heat	Manual soldering: 3055 for 30.5S; Wave soldering: 2305 for 50.5S	Appearance: No damage

Packaging, Transportation, Storage

Packaging: Terminals in dish material, housing in plastic bags, wafer in bags. Packaged with certificate. Exterior package is carton with packing list. Product must not rock in the box.

Transportation: Any vehicle allowed. Avoid rain, sun, collision, and extrusion. Transport temperature: -20~+50.

Storage: Ambient temperature -20~+40, Relative humidity 80%. Store in a warehouse free of acidic, alkaline, and other corrosive gases. Re-qualification test required if stored for over 6 months.

HCTL HC-2510-4A Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Shenzhen ECER Network Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!