| Terminal crimping wires, axial | AWG#22 wire, 25 3mm rate of pullout force | More than 50N |
| Terminal crimping wires, axial | AWG#24 wire, 25 3mm rate of pullout force | More than 30N |
| Terminal crimping wires, axial | AWG#26 wire, 25 3mm rate of pullout force | More than 20N |
| Terminal crimping wires, axial | AWG#28 wire, 25 3mm rate of pullout force | More than 13N |
| Terminal and hole seat | Fixed terminals pulled out from the hole in the seat capacity, 25 3mm rate | More than 15N |
| Single contact inserting force | Housing matched with terminal ends, 25 3mm rate | Less than 6N |
| Single contact withdrawal force | Housing matched with terminal ends, 25 3mm rate | More than 0.5N |
| Pin Retention force | Exerts a force on the pin end, 25 3mm rate | More than 15N |
| Contact Resistance | Mate connectors up to 30 cycles (Max rate 10 cycles/min) prior to environmental test | <30m |
| Durability | 30 cycles | N/A |
| Contact Resistance | After Durability Test | <30m |
| Contact Resistance | Thermal Aging Test (852C, 96 hours) | <30m |
| Contact Resistance | Humidity Test (402C, 90-95%RH, 96 hours) | <30m |
| Contact Resistance | Temperature Cycling Test (-553C to 853C, 5 cycles) | <30m |
| Contact Resistance | Vibration Test (10-55-10 Hz/min, 1.5mm p-p, 2 hours per direction) | <30m |
| Insulation Resistance | Humidity Test (402C, 90-95%RH, 96 hours) | 500M |
| Withstand Voltage | Humidity Test (402C, 90-95%RH, 96 hours) | No breakdown or flashover |
| Insulation Resistance | Temperature Cycling Test (-553C to 853C, 5 cycles) | 500M |
| Withstand Voltage | Temperature Cycling Test (-553C to 853C, 5 cycles) | No breakdown or flashover |
| Current Discontinuity | Vibration Test (10-55-10 Hz/min, 1.5mm p-p, 2 hours per direction) | 1 micro second Max |
