| Current Rated | | 4 | A |
| Voltage Rated | | 250 | V AC DC |
| Contact Resistance | Mate connector, 20mV max voltage, 100mA max current (Initial) | < 20 | m |
| Mate connector, 20mV max voltage, 100mA max current (After Durability/Environmental) | < 30 | m |
| Withstand Voltage | Mate connectors, 1000V AC (rms) for 1 min, adjacent terminals to ground | No breakdown or flashover | |
| Insulation Resistance | Adjacent contacts, 500V DC (rms) for 1 min | > 1000 | M |
| Terminal crimping wire strength | AWG#24 wire | > 30 | N |
| AWG#26 wire | > 20 | N |
| AWG#28 wire | > 13 | N |
| AWG#30 wire | > 8 | N |
| Fixed terminals and hole seat | Per contact, pulled out from hole seat at 253mm/min | > 15 | N |
| Single contact insertion force | Housing+terminal with Wafer, at 253mm/min | ≤ 6 | N |
| Single contact withdrawal force | Housing+terminal with Wafer, at 253mm/min | > 0.6 | N |
| Pin Retention force | Per contact, pin end force at 253mm/min | > 15 | N |
| Durability | 30 cycles (max 10 cycles/min) | Contact Resistance ≤ 30 m | |
| Vibration | Connector combination, welded to PCB, 10-55-10 Hz/min, 1.5mm p-p amplitude, 2 hours per axis (X, Y, Z) | Appearance: No damage | |
| Contact Resistance ≤ 30 m | |
| Current Discontinuity: 1 sec Max | |
| Thermal Aging | Connector combination, 852 for 96 hours | Appearance: No damage | |
| Contact Resistance ≤ 30 m | |
| Temperature Rise | Mate connector, with max rated current | ≤ 30 | |
| Humidity (Constant) | Connector combination, 402, 90-95%RH for 96 hours | Appearance: No damage | |
| Contact Resistance ≤ 30 m | |
| Insulation Resistance ≥ 500 M | |
| Temperature Cycling | Connector combination, 5 cycles (-553 30min, 853 30min, with transition time) | Appearance: No damage | |
| Contact Resistance ≤ 30 m | |
| Insulation Resistance ≥ 500 M | |
| Salt Spray | Connector combination, 353, 51% solution (48h for stamped before plated, 8h for stamped after plated) | Appearance: No damage | |
| Contact Resistance ≤ 30 m | |
| Solder Ability | Soldering test, 2455 for 30.5S | Soldering Area ≥ 90% | |
| Resistance to Soldering Heat | Manual soldering: 3055 for 30.5S (1.5mm from end) | Appearance: No damage | |
| Wave soldering: 2305 for 50.5S | Appearance: No damage | |
