| Product Name | 2.0mm Horizontal SMT Connector | AFC20-S**ACA-00 |
| Version | 1 | Page 1 of 6 |
| Standard Rating | Rated Voltage | 250V AC/DC |
| Standard Rating | Rated Current | 2.0A |
| Standard Rating | Operating Temperature Range | -25+105 |
| Standard Rating | Operating Humidity Range | Below 90% RH |
| Environmental Protection | Compliance | ROHS |
| Packing | Inner/Outer | Joint and several inner packing, carton outer packing, sealed in box |
| Transport Environment Temperature | Range | -20 to +50 |
| Storage Environment Temperature | Range | -20 to +50 |
| Storage Humidity | Max | 90% RH |
| Part Name | Base Material | LCP E130i |
| Part Name | Pin Material | Brass |
| Part Name | Stator Material | Brass |
| Appearance | Plastic Parts | Free of obvious scars, mottled, cracked, burr, flash, lack of material, and deformation. |
| Appearance | Metal Parts | Smooth, clean, no rust, oxidation, peeling, blackening, or mechanical damage. |
| Electrical Characteristics | Contact Resistance | 20m Max (Initial), 30m Max (After tests) |
| Electrical Characteristics | Insulation Resistance | 1000M Min (Initial), 500M Min (After Moisture Test) |
| Electrical Characteristics | Withstand Voltage | 1000V AC/1min (Initial), 600V AC/1min Min (After Moisture Test) |
| Environmental Characteristics | Heating Test (+105, 96H) | Appearance: No damage; Contact Resistance: 30m Max |
| Environmental Characteristics | Cold Tolerance Test (-25, 96H) | Appearance: No damage; Contact Resistance: 30m Max |
| Environmental Characteristics | Moisture Resistance Test (40, 90-96% RH, 96H) | Appearance: No damage; Insulation Resistance: 500M Min; Withstand Voltage: 600V AC/min Min |
| Environmental Characteristics | Temperature Cycle (5 cycles) | Appearance: No abnormalities; Contact Resistance: 30m Max |
| Environmental Characteristics | Salt Spray Test (24H) | Appearance: No damage or corrosion; Contact Resistance: 30m Max |
| Environmental Characteristics | Weldability | Tin area above 95% (2455, 2.50.5s) |
| Environmental Characteristics | Soldering Resistance | No obvious deformation, damage, blistering of plastic parts; Electrical characteristics must meet specifications (2605, 51s) |
| Mechanical Properties | Pin Fixing Force | 10N Min (Single pin) |
| Mechanical Properties | Terminal Retention in Plastic Parts | 7N Min (Single terminal) |
| Mechanical Properties | Mechanical Life | 50 cycles (Plug/unplug 50 times at 10 cycles/min, no power) |
| Mechanical Properties | Insertion/Extraction Force | Refer to detailed table for specific pin counts (e.g., Pin 1: Insert 4.00N, Pull out 1.50N; Pin 16: Insert 80.00N, Pull out 27.00N) |
