| Operating Temperature Range | | -55 to +105C (Note1) | X | |
| Storage Temperature Range | | -10 C to +60C (Note3) | X | |
| Operating Humidity Range | | 20% to 80% (Note2) | X | |
| Storage Humidity Range | | 40% to 70% (Note3) | X | |
| Applicable Connector | | DF51A-4DP-2DSA(##), DF51-4DP-2DS(##), DF51-4DEP-2C(##) | | |
| Current (AWG) | | AWG 22 : 3.0A, AWG 24 : 2.5A, AWG 26 : 2.0A, AWG 28 : 1.0A, AWG 30 : 0.5A | | |
| Applicable Contact | | DF11-22SC(A)/SCF(A), DF11-2428SC(A)/SCF(A), DF11-30SC(A)/SCF(A) | | |
| ULC-UL Rating Voltage | | 30V AC/DC | | |
| ULC-UL Rating Voltage | | 250 V AC/DC | | |
| ULC-UL Rating Current (AWG) | | AWG 22 : 2.0A, AWG 24 to 28 : 1.0A, AWG 30 : 0.5A | | |
| Construction - General Examination | Visually and by measuring instrument. According to drawing. | | X | X |
| Construction - Marking | Confirmed visually. | | X | X |
| Electric Characteristics - Insulation Resistance | 500 V DC. | 1000 M MIN. | X | |
| Electric Characteristics - Voltage Proof | 650 V AC for 1 min. | No flashover or breakdown. | X | |
| Mechanical Characteristics - Mechanical Operation (Sn Plating) | 30 times insertion and extraction. | No damage, crack or looseness of parts. | 5 | X |
| Mechanical Characteristics - Mechanical Operation (Au Plating) | 50 times insertion and extraction. | | X | |
| Mechanical Characteristics - Mating and unmating Force (Sn Plating) | It takes out and inserts with a conformity connector. | 1.Insertion Force : 24.2N MAX. 2.Extraction Force : 1.2N MIN. | X | |
| Mechanical Characteristics - Mating and unmating Force (Au Plating) | It takes out and inserts with a conformity connector. | 1.Insertion Force : 18.5N MAX. 2.Extraction Force : 1.0N MIN. | X | |
| Mechanical Characteristics - Vibration | Frequency 10 to 55 Hz, single amplitude 0.75 mm, at 10 cycles for 3 direction. | No damage, crack or looseness of parts. | 5 | X |
| Mechanical Characteristics - Shock | Acceleration 490 m/s, duration of pulse 11 ms at 3 times for 3 directions. | | X | |
| Mechanical Characteristics - Contact extraction force | Pull out the cable after housing fixation. | 11.8N MIN | X | |
| Environmental Characteristics - Damp Heat (Steady State) | Exposed at 40 2C , humidity 90 to 95 %, 96 h. (After leaving the room temperature for 1 to 2h.) | 1.Insulation resistance: 500 M MIN. 2.No damage, crack or looseness of parts. | 5 | X |
| Environmental Characteristics - Rapid Change Of Temperature | Temperature -55C +105C Time 30min 30min Under 5 Cycles. (The transferring time of the tank is 2 to 3 MIN) (After leaving the room temperature for 1 to 2h.) | 1.Insulation resistance: 1000 M MIN. 2.No damage, crack or looseness of parts. | 5 | X |
| Environmental Characteristics - Dry Heat | Exposed at 1052C, 96h | | X | |
| Environmental Characteristics - Cold | Exposed at -553C, 96h | | X | |
