| 4-3-1. Insertion/Withdrawal Resistance | Mated up to 30 cycles repeatedly at a rate of 10 cycles per minute. | MAX. 40 milliohm | milliohm | |
| 4-3-2. Temperature Rise | Carrying rated current load. (UL 498) | MAX. 30 | | |
| 4-3-3. Vibration | 10-55-10 Hz in 1 minute sweep time, 1.5mm P-P amplitude. Duration: 2 hours in each x,y,z axes. (MIL-STD-202 Method 201) | Contact Resistance MAX. 40 milliohm; Discontinuity MAX. 1.0 microsecond; Appearance: No Damage | milliohm, microsecond | |
| 4-3-4. Shock | 490m/s (50G), 3 strokes in each X,Y,Z axis. (JIS C60068-2-27/MIL-STD-202 Method 213) | Contact Resistance MAX. 40 milliohm; Discontinuity MAX. 1.0 microsecond; Appearance: No Damage | milliohm, microsecond | |
| 4-3-5. Heat Resistance | 85C for 96 hours. (JIS C60068-2-2/MIL-STD-202 Method 108) | Contact Resistance MAX. 40 milliohm; Appearance: No Damage | milliohm | |
| 4-1-1. Contact Resistance | Mate connectors, measure by dry circuit, 10mV MAX., 20mA. (JIS C5402 5.4) | MAX. 20 milliohm | milliohm | |
| 4-1-2. Insulation Resistance | Apply 500V DC between adjacent terminals or terminal and ground for 1 minute. (JIS C5402 5.2/MIL-STD-202 Method 302) | MIN. 100 Megohm | Megohm | |
| 4-1-3. Dielectric Strength | Apply 800V AC(rms) between adjacent terminals or terminal and ground for 1 minute. (JIS C5402 5.1/MIL-STD-202 Method 301) | No Breakdown | | |
| 4-1-4. Contact Resistance on Crimped Portion | Crimp the applicable wire to the terminal, and measure contact resistance by dry circuit, 10mV MAX., 20mA. | MAX. 20 milliohm | milliohm | |
| 4-3-6. Cold Test | -40C for 96 hours. (JIS C60068-2-1) | Contact Resistance MAX. 40 milliohm; Appearance: No Damage | milliohm | |
| 4-3-7. Humidity Test | 55C, 90-95% Relative Humidity for 96 hours duration. (JIS C60068-2-3/MIL-STD-202 Method 103) | Contact Resistance MAX. 40 milliohm; Appearance: No Damage; Dielectric Strength Must meet 4-1-3; Insulation Resistance MIN. 10 Megohm | milliohm, Megohm | |
| 4-3-8. Temperature Cycling | a) -55C for 30 minutes; b) +105C for 30 minutes. (JIS C0025) | Contact Resistance MAX. 40 milliohm; Appearance: No Damage | milliohm | 5 cycles |
| 4-3-9. Salt Spray Test | 48 hours exposure to a salt spray from 5% solution at 35C. (JIS C5028/MIL-STD-202 Method 101) | Appearance: No Damage; Contact Resistance MAX. 40 milliohm | milliohm | |
