Home > Rectangular Connectors >

JUSHUO AFC20-S04ACA-00

Product Categories

Shenzhen ECER Network Technology Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

JUSHUO AFC20-S04ACA-00

Name: JUSHUO AFC20S04ACA00
Brand: AFC20-S04ACA-00
Price: 1 USD

Reference Series : PH

Z-Height of the Board : 5.55mm

Pitch : 2mm

Delivery Time : 1 working day

Description : Connector Header 4 position 2mm Pitch 2A Surface Mount, Right Angle -20℃~+85℃

Brand Name : AFC20-S04ACA-00

Number of PINs Per Row : 4

Pins Structure : 1x4P

Flame Retardant Rating : UL94V-0

Contact Material : Brass;LCP

Number of Rows : 1

Model Number : AFC20-S04ACA-00

Packaging Details : SMD,P=2mm,Surface Mount,Right Angle

Contact Plating : Tin

Voltage Rating (Max) : 250V

MOQ : 5

Stock : 1083

Operating Temperature : -20℃~+85℃

X-Length of Bottom Edge on Board (Spacing Line) : 11.9mm

Mounting Type : Surface Mount, Right Angle

Y-Width of Bottom Edge on Board : 7.55mm

Contact Now

Product Acknowledgement

This document serves as a product acknowledgement for the 2.0mm pitch horizontal SMT connector, model AFC20-S**ACA-00. It details the product's specifications, characteristics, and requirements.

Standard Rating, Packaging, Transport, Storage, Part Name & Material, Appearance

Item	Specifications
Rated Voltage	250V AC/DC
Rated Current	2.0A
Operating Temperature Range	-25+105
Operating Humidity Range	Below 90% RH
Environmental Protection	Complies with ROHS environmental requirements.
Packing	Inner packing: continuous reel; Outer packing: carton. Product sealed in box, no shaking.
Transport	Allowed by any means. Avoid rain, snow, sunlight. Prevent collision, extrusion. Transport Temperature: -20 to +50.
Storage	Store in a warehouse with ambient temperature -20+50, relative humidity not exceeding 90%, and no acidic, alkaline, or corrosive gases.
Part Name / Material	Base: LCP E130i Pin: Brass Stator: Brass
Appearance	Plastic parts: free of scars, discoloration, cracks, burrs, flash, material shortage, deformation. Metal parts: smooth, no rust, oxidation, peeling, blackening, mechanical damage.

Electrical Characteristics

No.	Project	Test Method	Performance Requirements
9.1	Contact Resistance	Plugged connector tested with contact resistance meter.	20m Max
9.2	Insulation Resistance	Plugged connector, 1000V DC applied between adjacent contacts and between contacts and enclosure for 1 minute.	1000M Min
9.3	Withstand Voltage	Plugged connector, 1000V AC applied between adjacent contacts and between contacts and enclosure for 1 minute.	No breakdown or flashover phenomena.

Environmental Characteristics

No.	Project	Test Method	Performance Requirements
10.1	Heating Test	Plugged connector in +1052 for 96H, then 1-2H at normal temp.	Appearance: No damage. Contact Resistance: 30m Max.
10.2	Cold Tolerance Test	Plugged connector in -252 for 96H, then 1-2H at normal temp.	Appearance: No damage. Contact Resistance: 30m Max.
10.3	Moisture Resistance Test	Plugged connector in 402, 90-96% RH for 96H, then 1-2H at normal temp.	Appearance: No damage. Insulation Resistance: 500M Min. Withstand Voltage: 600V AC/minute Min.
10.4	Temperature Cycle	5 cycles: -253 (30min) -> Room Temp (1h) -> +1053 (30min) -> Room Temp (1h). Recover 2H at normal temp.	Appearance: No abnormalities. Contact Resistance: 30m Max.
10.5	Salt Spray Test	Continuous spray with 51% NaCl solution for 24H. Wash with distilled water, recover 1-2H at normal temp.	Appearance: No damage, corrosion. Hardware: no serious rust exposing base metal. Slight corrosion on blanking surface allowed if performance unaffected. Contact Resistance: 30m Max.
10.6	Weldability	Dipped in 2455 tin solution for 2.50.5 seconds.	Tin area: 95% or more.
10.7	Soldering Resistance	Product subjected to 2605 reflow or wave soldering for 51S on PCB.	1. Plastic parts: no obvious deformation, damage, blistering. 2. Electrical characteristics must meet specifications.

Mechanical Properties

No.

Project

Test Method

Performance Requirements

11.1

Pin Fixing Force

Fix pin holder, apply force at pin front end at 253mm/min until pin withdraws.

Single Pin: 10N Min.

11.2

Terminal Retention in Plastic Parts

Terminal matched with socket, pull force at 253mm/min along wire direction.

Single Terminal: 7N Min.

11.3

Mechanical Life

Plug and unplug 50 times at 10 times/min without power.

Contact Resistance: 30m Max.

11.4

Insertion/Extraction Force

(1) Fit socket and terminal, test insertion/extraction on same axis with pin holder. Remove socket lock. Test speed: 205mm/min.

(2) Performance Requirements:

Position	Insertion (N)	Pull Out (N)	Position	Insertion (N)	Pull Out (N)
1	4.00	1.50	9	52.00	16.50
2	24.00	6.00	10	56.00	18.00
3	28.00	7.50	11	60.00	19.50
4	32.00	9.00	12	64.00	21.00
5	36.00	10.50	13	68.00	22.50
6	40.00	12.00	14	72.00	24.00
7	44.00	13.50	15	76.00	25.50
8	48.00	15.00	16	80.00	27.00

JUSHUO AFC20-S04ACA-00 Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Shenzhen ECER Network Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!