JAE Electronics MX19002P51

Product Description

This document details the part description, crimping criteria, applicable wires, and contact withdrawal procedures for JAE connectors, specifically focusing on the MX19 series. It provides essential technical information for proper installation and maintenance.

Crimping Criteria

A properly crimped contact meets the following criteria:

1. Meets the specified crimp height.
2. Includes a "Bell-mouth" (no crimping on conductor).
3. The conductor tip protrudes 0.5mm or less from the "Conductor Barrel."
4. All wire conductors are within the "Conductor Barrel."
5. No wire insulator is crimped into the "Conductor Barrel."
6. No cracks or burrs in the crimping area.

Contact Withdrawal

Procedure for withdrawing contacts:

1. Visually inspect the connector for damage.
2. Lightly push the wire with the crimped contact.
3. Insert a "Withdrawing Tool" into the tool cavity.
4. Release contact locking by meeting the molding lance with the tool.
5. Withdraw the wire on a straight axis.

Notes:

• Suitable withdrawing tool for JAE is "ET-MX19."
• Do not snag the contact on the grommet by forced withdrawal.
• The limitation frequency for withdrawing at one cavity is 3 times. Replace if damaged.
• Do not apply unnecessary force.
• Insert withdrawing tool only into the "tool cavity," never the contact cavity.

Notes:

• Crimp height dimension is fabricated by JAE's applicator.
• Crimp width/height and crimp height of wire insulators are reference values only.