| Current Rating | 2A (Note 1) | All pins powered/used as power lines (Header: 2A) |
| Voltage Rating | 250V AC (Crimping) / 100V AC (Insulation Displacement) | - |
| Wire Size | 22 to 26 AWG: 2A (Crimping)
28 AWG: 1A (Crimping)
30 AWG: 0.5A (Crimping)
26 AWG: 1A (Insulation Displacement) | - |
| Operating Temperature Range | -30 to 85C (Note 2) | Includes temperature rise of power lines |
| Operating Humidity Range | 40 to 80% (Note 3) | Connector should be completely dry (no condensation) |
| Storage Temperature Range | -10 to 60C (Note 4) | Long-term storage of unused products before PCB mounting |
| Storage Humidity Range | 40 to 70% (Note 4) | Long-term storage of unused products before PCB mounting |
| Insulation Resistance | 1000M min. | 500V DC |
| Withstanding Voltage | No flashover or insulation breakdown. | 650V AC/1 minute |
| Contact Resistance | 30m max. | 100mA |
| Single Insertion/Extraction Force | 0.3N (30gf) min., 4.4N (450gf) max. | Measured by square steel-made pin of 0.50.002mm |
| Vibration | No electrical discontinuity of 1s or more | Frequency: 10 to 55 Hz, single amplitude 0.75mm, 2 hours in each of 3 directions |
| Humidity (Steady state) | Contact resistance: 30m max.
Insulation resistance: 500M min. | 96 hours at 40C and 90% to 95% humidity |
| Temperature Cycle | Contact resistance: 30m max.
Insulation resistance: 1000M min. | 5 cycles (-55C: 30 min 5 to 35C: 5 to 15 min) or (-85C: 30 min 5 to 35C: 5 to 15 min) |
| Durability (Mating/un-mating) | Contact resistance: 30m max. | Tin plated: 30 cycles
Gold plated: 50 cycles |
| Resistance to Soldering Heat | No deformation affecting performance. | Flow: 260C for 10 seconds
Reflow: 300C for 2 seconds
Manual soldering: 300C for 3 seconds |
