| Series | DF3 | 2mm Pitch Connector |
| Current Rating | 3A (Note 1) | Crimping IDC: 3A (AWG#22 to 24), 2A (AWG#26), 1A (AWG#28); Press-fit: 250V AC; Press-connect: 100V AC |
| Voltage Rating | AC100V | Press-fit: 250V AC; Press-connect: 100V AC |
| Wire Size | AWG#22 to #28 | Crimping IDC: AWG#22 to 24 (3A), AWG#26 (2A), AWG#28 (1A); IDC: AWG 26, 28 (1A); Press-fit: AWG#22 to 24; Press-connect: AWG#26, 28 |
| Operating Temperature Range | -30C to +85C (Note 2) | |
| Storage Temperature Range | -10C to +60C (Note 3) | |
| Operating Humidity Range | 40% to 80% (Note 2) | |
| Storage Humidity Range | 40% to 70% (Note 3) | |
| UL CSA File No. | UL: E52653, CSA: LR95109 | |
| Insulation Resistance | 1000M min. | 500V DC |
| Withstanding Voltage | 650V AC/1 minute | No flashover or insulation breakdown |
| Contact Resistance | 30m max | 100mA |
| Single Insertor/Extraction Force | MIN 0.3N (30gf), MAX 4.4N (450gf) | Measured by square steel pin (0.50.002mm) |
| Vibration | No electrical discontinuity of 1s or more | Frequency: 10 to 55 Hz, single amplitude 0.75 mm, 2 hours in 3 directions |
| Humidity (Steady state) | Contact resistance: 30m max., Insulation resistance: 500M min. | 96 hours at 40C and 90% to 95% humidity |
| Temperature Cycle | Contact resistance: 30m max., Insulation resistance: 1000M min. | 5 cycles (-55C for 30 min, 5 to 35C for 10 min, 85C for 30 min, 5 to 35C for 10 min) |
| Durability (Mating/un-mating) | Contact resistance: 30m max. | Tin plating: 30 cycles, Gold plating: 50 cycles |
| Resistance to Soldering Heat | No deformation affecting performance | Flow: 260C for 10 sec, Manual: 300C for 2 sec, Reflow: Recommended profile, Manual: 300C for 3 sec |
| Materials | Insulator: Polyamide (UL94V-0), Contact: Phosphor bronze/Brass | Finish: Tin plated or gold plated |
