| PCB connector, nominal cross section | 1.5 mm |
| Color (Housing) | green |
| Nominal current | 8 A |
| Rated voltage (III/2) | 160 V |
| Contact surface | Sn |
| Contact connection type | Socket |
| Number of potentials | 5 |
| Number of rows | 1 |
| Number of positions | 5 |
| Number of connections | 5 |
| Pitch | 3.5 mm |
| Connection method | Screw connection with tension sleeve |
| Screw head form | L Slotted |
| Conductor/PCB connection direction | 0 |
| Locking | without |
| Mounting | without |
| Type of packaging | packed in cardboard |
| Conductor cross section AWG | 28...16 |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm ... 1.5 mm |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm ... 0.5 mm |
| 2 conductors with same cross section, solid | 0.08 mm ... 0.5 mm |
| 2 conductors with same cross section, flexible | 0.08 mm ... 0.75 mm |
| 2 conductors with same cross section, flexible, with ferrule without plastic sleeve | 0.25 mm ... 0.34 mm |
| 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.5 mm ... 0.5 mm |
| Cylindrical gauge a x b / diameter | 24 mm x 1.5 mm / 1.6 mm |
| Stripping length | 7 mm |
| Drive form screw head | Slotted (L) |
| Tightening torque | 0.22 Nm ... 0.25 Nm |
| Recommended crimping tool (ferrules without insulating collar) | 1212034 CRIMPFOX 6 |
| Recommended crimping tool (ferrules with insulating collar) | 1212034 CRIMPFOX 6 |
| Contact material | Cu alloy |
| Surface characteristics | hot-dip tin-plated |
| Metal surface terminal point (top layer) | Tin (4 - 8 m Sn) |
| Metal surface contact area (top layer) | Tin (4 - 8 m Sn) |
| Insulating material | PA |
| Insulating material group | I |
| CTI according to IEC 60112 | 600 |
| Flammability rating according to UL 94 | V0 |
| Glow wire flammability index GWFI according to EN 60695-2-12 | 850 C |
| Glow wire ignition temperature GWIT according to EN 60695-2-13 | 775 C |
| Temperature for the ball pressure test according to EN 60695-10-2 | 125 C |
| Vibration test (IEC 60068-2-6:2007-12) | Frequency: 10-150-10 Hz, Sweep speed: 1 octave/min, Amplitude: 0.35 mm (10 Hz ... 60.1 Hz) / 5g (60.1 Hz ... 150 Hz), Acceleration: 5g, Test duration per axis: 25h, Test directions: X-, Y- and Z-axis |
| Durability test (IEC 60512-9-1:2010-03) | Impulse withstand voltage: 2.95 kV, Contact resistance R: 1.3 m, Contact resistance R: 1.4 m, Insertion/withdrawal cycles: 25, Insulation resistance, neighboring positions: >5 M |
| Climatic test (ISO 6988:1985-02) | Corrosive stress: 0.2 dm SO, on 300 dm/40 C/1 cycle, Thermal stress: 100 C/168 h |
| Power-frequency withstand voltage | 1.39 kV |
| Ambient temperature (operation) | -40 C ... 100 C (dependent on the derating curve) |
| Ambient temperature (storage/transport) | -40C...70C |
| Relative humidity (storage/transport) | 30%..70 % |
| Ambient temperature (assembly) | -5C ... 100 C |
| Thermal test | Test group C (IEC 60512-5-1:2002-02) | Tested number of positions: 20 |
| Insulation resistance, neighboring positions (IEC 60512-3-1:2002-02) | >5 M |
| Air clearances and creepage distances (IEC 60664-1:2007-04) | CTI 600 |
